Product ID:11410,11420 WEAR RESISTANT PUTTY (WR-2) RESIN
MSDS Date:06/22/1995
FSC:8030
NIIN:00-229-8735
MSDS Number: BZXRQ

Emergency Phone: 508-777-1100

Info Phone: 508-777-1100

Cage: 16059

Telephone: 1-508-777-1100

Cage: 16059

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 10-35%

LD50 LC50 Mixture:ORAL LD50(RAT): 11.4 G/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MILD TO MODERATE IRRITATION.
SKIN: MILD TO MODERATE IRRITATION & SENSITIZATION. INGESTION: LOW
TOXICITY, CAN CAUSE GI IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, NAUSEA, VOMITING, DIARRHEA,
ITCHING, SWELLING, RASH.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA & OTHER SKIN
DISORDERS.

First Aid:EYES: FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: WASH THOROUGHLY
W/SOAP & WARM WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN
IF NEEDED. INGESTION: DON'T INDUCE VOMITING. DILUTE W/2 GLASSES OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>400F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:TOXIC SMOKE & VAPORS MAY FORM DURING
COMBUSTION.

Spill Release Procedures:PREVENT SKIN CONTACT. VENTILATE AREA.
ELIMINATE IGNITION SOURCES. SCRAPE UP & DISCARD IN SUITABLE
CONTAINERS, USING INERT ABSORBENT MATERIAL SUCH AS VERMICULITE IF
NEEDED. PREVENT PRODUCT FROM ENTERIN G STREAMS, DRINKING WATER &
SEWER SYSTEMS.

Handling and Storage Precautions:STORE WELL CLOSED IN A COOL, DRY
PLACE. AFTER MIXING W/HARDENER, OBSERVE PRECAUTIONS RECOMMENDED.
AFTER PROPER CURING, PRODUCT ISN'T HAZARDOUS.
Other Precautions:WHEN SANDING/MACHINING THE CURED MATERIAL, TAKE
PROPER PRECAUTIONS AGAINST INHALATION OF THE DUSTS GENERATED.

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMP. USE
ORGANIC VAPOR CARTRIDGES AS NEEDED.
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. MECHANICAL
(GENERAL) IS ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:PROTECTIVE GEAR.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD DECONTAMINATED LEATHER ARTICLES, SHOES & BELTS.
Supplemental Safety and Health
KEY1:N1. THIS ENTRY DESCRIBES PART A OF A TWO PART KIT. SEE THIS SAME
NSN, P/N IND D, FOR PART B DATA. WASH THOROUGHLY AFTER USING,
BEFORE EATING/ SMOKING.

HCC:B3
Vapor Pres:0
Vapor Density:>1
Spec Gravity:2.1
pH:7
Solubility in Water:0
Appearance and Odor:DARK GRAY PASTE W/LOW ODOR
Percent Volatiles by Volume:100/WT

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES(SECONDARY & PRIMARY ALIPHATIC AMINES)& OXIDIZERS.
Stability Condition to Avoid:OPEN FLAME, EXTREME HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN;
ALDEHYDES, ACIDS & OTHER ORGANIC COMPOUNDS FROM INCOMPLETE
COMBUSTION.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN RESIN IS MIXED
W/EPOXY HARDENER. USE CAUTION WHEN MIXING A POUND/MORE.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. THE RESIN CONTAINS NO RCRA HAZARDOUS WASTES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.